ZEPHYRO: Decorative System with a sandy metallic finish
METHODS OF APPLICATION
Surface preparation:
Sandpaper and dust any imperfections with STUCCOMURO and apply 1 coat of FISSATIVO UNIVERSALE which should be correctly diluted with water at a ratio of 1:5 up to 1:10 according absorption of the surface.
Leave to dry for at least 4 hours and apply 1 or 2 coats of PRIMER S, which is special slightly rough either white or slightly colored, correctly diluted
(consult the Technical data sheet) leaving 4 to 5 hours between each coat.
(photo 1).
Application:
Spread a layer of ZEPHYRO with a SPALTER DECORA’ tool on the surface (photo n.2) ) by using irregular movements
like cris crossing brush marks (photo n.3). The brush marks can also be vertical, horizontal or oblique it all depends on the finish you wish to obtain.
1 coat of ZEPHYRO is normally sufficient in order to a perfect coverage of the surface.
The ZEPHYRO finish can be clearly see n when the entire surface has completely dried about 4 to 5 hours after the application
Colouring and Packaging:
ZEPHYRO BASE PEARL & ZEPHYRO BASE RED PEARL: packaging of Lt. 2,5
ARTHE CONCENTRATO: packaging of ml.70
Each color in our color chart has been divided into 4 different shades, each one corresponds to a letter E, F, G, H, X in order to obtain the desired color add in 2,5 Lt. di ZEPHYRO SILVER BASE o ZEPHYRO GOLD BASE the quantity of ARTHE CONCENTRATO according to the following chart:
