Atr

METHODS OF APPLICATION
Surface preparation
Sandpaper, dust and level any imperfection using Stuccomuro or Polistuck and then apply one coat of UNIVERSAL FISSATIVO which should be diluted in water at a ratio of between 1:R up to 1:10 this depends on the absorption of the surface to be applied.
Leave it to dry for at least 4 hours and then apply 2 coats of Spiver GENYUS SPECIAL correctly diluted (consult the technical data sheet) leave an interval of 4-5 hours between each application (photo n.1) .
Application
The application of Caravaggio is extremely easy and quick.
There are 3 different methods of application.
Spatolato effect:
apply the first light coat 0.5 to 1mm of Caravaggio using the appropriate Spiver “Caravaggio plastic transparent trowel” (Photo n.2) and leave it for at least 6 to 8 hours. Apply the second coat of Caravaggio (Photo n.3) in small areas about one square meter at a time and immediately go back over the applied surface gently using the trowel in different directions (Photo n.4); continue the full area in the same way.
Damascato Effect:
apply the first light coat 0.5 to 1mm of Caravaggio using the appropriate Spiver “Caravaggio plastic transparent trowel” (Photo n.2) and leave it for at least 6 to 8 hours. Apply the second coat of Caravaggio (Photo n.3) after drying put some product on the Spiver “Red Trowel - Broccato” with the help of a paint brush (Photo n.6); apply Caravaggio on the entire surface “tapping” the surface in irregular movements (Photo n.7); leave it to set for 5 minutes and then with a perfectly clean Spiver “Red Trowel - Broccato” go back over the surface pulling the trowel lightly in different directions. (Photo n.8).
Broccato Effect:
apply the first light coat 0.5 to 1mm of Caravaggio using the appropriate Spiver “Caravaggio plastic transparent trowel” (Photo n.2) and leave it for at least 6 to 8 hours. Apply the second coat of Caravaggio a (little thicker than the first coat) in small areas about one square meter at a time (Photo n.3) and go back over the surface with the Spiver “Red Trowel - Broccato” using circular movements (Photo n.5); repeat the same operation for the entire surface.
Packaging and colouring
CARAVAGGIO NEUTRAL BASE: Lt.4
CARAVAGGIO NEUTRAL GOLD BASE: Lt.4
ARTHE CONCENTRATO: ml.70
Each article in our colour chart is divided into 4 different grades, each one corresponds to a letter E , F ,G ,H.
To obtain the colour desired add the quantity of ARTHE CONCENTRATO indicated in the chart below to 4Lt. of Caravaggio Neutra
Art. ...E
Art. ...F
Art. ...G
Art. ...H
Add 3X70 ml.
Add 1X70 ml.
Add (*) 22 ml.
Add (*) 8 ml.
(*): the amount obtainable with the syringe measure which is available from us.
Varying the dosage of ARTHE CONCENTRATO, allows you get an unlimited range of colours
Yield:
about 4-5 mq. / Lt. (two coats)
 

 

 
20:03:57