|
NAHIR RIGATO: Innovative decorative Solution extraordinary beauty and ease of implementation, which is used in both environments style ethnic (fascinating effects such as wengè or douglas), in a modern style (streaked dark and light shades)
Application
Apply on a smooth and well cohesive wall or plasterboard, 1 coat of PRIMER S with a short haired roller (Photo n. 1).
After at least 8 hours spread 1 coat about 2 to 3 mm of NAHIR with a plastic trowel making sure to cover the entire surface evenly (Photo n. 2). It is advisable to apply NAHIR in strips of about 50 to 70 cm along the entire wall. Immediately after with the special PETTINARTHE (Photo n. 3) finish NAHIR horizontally, vertically or mixture (depending on the effect desired); when finished (after at least 24 h), apply VELATURA with a paint brush following the direction of the lines (Photo n. 4), remove the excess product with our SPUGNARTHE (Photo n. 5).
Packaging and colouring
PRIMER S: Lt.4
NAHIR BASE: Lt.5 and Lt.15
VELATURA: Lt.4
ARTHE CONCENTRATO: ml.70 and ml.600
COLOURING NAHIR
Each article in our colour chart is divided into 3 different grades, each one corresponds to a letter A, B, C. So, in order to obtain the desired colour desired you must add the quantity of ARTHE CONCENTRATO indicated in the chart below to 15 Lt. of NAHIR
|
