Atr

NAHIR BROCCATO: Decorative Solution highly decorative aesthetic impact, easy to do, which is used in modern environments that old style.
Application
Apply on a smooth and well cohesive wall or plasterboard, 1 coat of PRIMER S with a short haired roller (Photo n. 1).
After at least 8 hours spread 1 coat about 2 to 3 mm of NAHIR with a plastic trowel making sure to cover the entire surface evenly (Photo n. 2).
Immediately after with the special Broccato Trowel finish NAHIR with movements in circular motion (Photo n. 3). When finished (after at least 24 h), apply VELATURA with a paint brush (Photo n. 4), remove immediately the excess product with our Transparent Trowel (Photo n. 5-6).
Packaging and colouring
PRIMER S: Lt.4
NAHIR BASE: Lt.5 and Lt.15
VELATURA: Lt.4
ARTHE CONCENTRATO: ml.70 and ml.600
COLOURING NAHIR
Each article in our colour chart is divided into 3 different grades, each one corresponds to a letter A, B, C.
So, in order to obtain the desired colour desired you must add the quantity of ARTHE CONCENTRATO indicated in the chart below to 15 Lt. of NAHIR
Art. ...A
Art. ...B
Art. ...C
Aggiun. 3X600 ml.
Aggiung. 1X600 ml.
Aggiungere 3X70 ml
COLOURING VELATURA
?Each article in our colour chart is divided into 4 different grades, each one corresponds to a letter E, F, G, H
So, in order to obtain the desired colour desired you must add the quantity of ARTHE CONCENTRATO indicated in the chart below:
Art. ...E
Art. ...F
Art. ...G
Art. ...H
Aggiun. 3X70 ml.
Aggiung. 1X70 ml.
Aggiung. (*) 22 ml
Aggiung. (*) 8 ml.
(*):The amount obtainable with the syringe measure which is available from us.
Varying the dosage of ARTHE CONCENTRATO, allows you to get an un limited range of colours.
Yield :
PRIMER S: 7 to 8 m² per Lt.
NAHIR BASE: 2 to 3 m² per Lt.
VELATURA: 7 to 8 m² per Lt.
20:03:57