NAHIR CRACKLE'’: Solution of great prestige decorative splitting effect, particular and original if it is finished with VELATURA CLASSIC, elegant and more valuable if it is finished with VELATURA PERLATA
Application
Apply on a smooth and well cohesive wall or plasterboard, 1 coat of PRIMER S with a short haired roller (Photo n. 1).
After about 12 hours apply 1 coat of FISSATIVO REOSAN (non diluted) (Photo n. 2).
After 24 hours apply BASE CRACKLE’ diluted 20% with water, using a short haired roll (Photo n. 3).
Wait 12 hours and apply NAHIR with special brush Spalter Decorà taking care to distribute a uniform thickness of about 2 mm. (Photo n. 4).
During drying process NAHIR reacts, creating the formation of irregular crack features.
After 24 hours complete the effect by applying 1 or 2 coats of VELATURA CLASSIC or VELATURA PERLATA with a paint brush (Photo n. 5) and finishing the effect with SPUGNARTHE or a glove (Photo n. 6).
Packaging and colouring
PRIMER S: Lt.4
FISSATIVO REOSAN: ml.750 and Lt. 2,5
BASE CRACKLE’: Lt. 5 and Lt.15
NAHIR BASE: Lt.5 and Lt.15
VELATURA: Lt.4
ARTHE CONCENTRATO: ml.70 and ml.600
COLOURING NAHIR
Each article in our colour chart is divided into 3 different grades, each one corresponds to a letter A, B, C.
So, in order to obtain the desired colour desired you must add the quantity of ARTHE CONCENTRATO indicated in the chart below to 15 Lt. of NAHIR
|
|
Art. ...A
|
Art. ...B
|
Art. ...C
|
|
Aggiun. 3X600 ml.
|
Aggiung. 1X600 ml.
|
Aggiungere 3X70 ml
|
|
|
COLOURING VELATURA
Each article in our colour chart is divided into 3 different grades, each one corresponds to a letter A, B, C.
So, in order to obtain the desired colour desired you must add the quantity of ARTHE CONCENTRATO indicated in the chart below to 15 Lt. of NAHIR
|
|
Art. ...E
|
Art. ...F
|
Art. ...G
|
Art. ...H
|
|
Aggiun. 3X70 ml.
|
Aggiung. 1X70 ml .
|
Aggiung. (*) 22 ml
|
Aggiung. (*) 8 ml. |
|
|
(*):The amount obtainable with the syringe measure which is available from us. Varying the dosage of ARTHE CONCENTRATO, allows you to get an un limited range of colours
Yield :
PRIMER S: 7 to 8 m² per Lt. - FISSATIVO REOSAN : 8 to10 m² per. Lt.- CRACKLE’ BASE: 2 to 3 m² per Lt NAHIR BASE: 2 to 3 m² per Lt. - VELATURA: 7 to 8 m² per Lt.
|
|
|
|
