|
ENCAUSTO FIORENTINO: grainy slaked lime-based decorative stucco
Treatment of the support:
The application on lime supports is recommended, but it can also be applied on plaster or by-products, old hydropaints, only if strong and well-fixed, after the application of a coat of Primer RV for hard supports (such as plasterboard, cellular cement, baked clay, etc.) (photo nr.1).
Application:
Spread a coat of ENCAUSTO FIORENTINO with a stainless steel float so as to level the support (photo nr. 2).
Apply a second coat of ENCAUSTO FIORENTINO so as to obtain a perfectly smooth surface.
Once the product is going to dry up, press slightly and polish with a clean stainless steel float until the wished result is obtained (photo nr. 3).
Packaging and Colouring:
ENCAUSTO FIORENTINO: Lt. 14, Lt. 4,67
Each article in our colour chart is divided into 4 different grades, each one corresponds to a letter A, B, C, D.
To obtain the colour desired add the quantity of ARTHE CONCENTRATO indicated in the chart below to14 Lt.of ENCAUSTO FIORENTINO.
|
